Besides a brief survey of our instruments more detailed specific information can be obtained via the contact link.

For connecting the instruments probes can be used, they are listed here 

 

And the Bias Tees:

Pico Sec Labs: 5541

MiniCircuits : ZFBT 6G

 
 

 

Agilent 86100A Digital Communication Oscilloscope

The Agilent 86100A Infiniium DCA is a high-speed oscilloscope that also functions as a digital communications analyzer and a time-domain reflectometer. The combined oscilloscope/analyzer makes complex compliance measurements in the shortest amount of time possible, eliminating the need for learning cumbersome compliance test procedures. Compliance measurements that once required many steps can now be performed in a single step. This new capability, along with an intuitive interface, allows engineers to perform entire procedures, such as compliance eye analysis, with the touch of a button. Now with <200 femtoseconds RMS jitter. click here.

 

Features

  • Frequency range to 50GHz
  • Integrated TDR/TDT measurements
  • Familiar Windows® user interface
  • Compatible with 83480A/54750A-series modules
  • Widest frequency range (250 kHz to 20 GHz) with 0.01 Hz frequency resolution - standard
  • Highest power available (+13/+20) at 20 GHz with excellent level accuracy (0.7 and 0.9 dB)
  • SSB phase noise less than -98 dBc/Hz at 1 kHz offset at 10 GHz carrier
  • AM, FM, phase, and pulse modulation

 

For more details go to the Manuals

Top

 

Agilent PSG 8251A Microwave Signal Generator

This Signal Generator has the following options:

  • Widest frequency range (250 kHz to 20 GHz) with 0.01 Hz frequency resolution - standard
  • Highest power available (+13/+20) at 20 GHz with excellent level accuracy (0.7 and 0.9 dB)
  • SSB phase noise less than -110 dBc/Hz at 20 kHz offset at 10 GHz carrier
  • Optional SSB phase noise less than -98 dBc/Hz at 1 kHz offset at 10 GHz carrier
  • Digital Sweep functions (list and step) with capability of calibrating every point at the test port using the user flatness correction
  • Easy frequency extension to 110 GHz with Keysight's 83550 Series
  • AM, FM, phase, and pulse modulation
  • Dual internal modulation generators with sine, square, triangle, positive/negative ramp, Gaussian Noise, Uniform Noise, Swept Sine, Dual Sine up to 1MHz rates
  • Internal pulse generator 14 MHz max PRF

For more details go to the Manuals

 

Top
 

Agilent ESG E4438C Vector Signal Generator

 

 



The Agilent E4438C ESG vector signal generator sets a new level of performance by offering exceptional baseband signal generation operation. Its wide RF modulation bandwidth, fast sample rate, and large memory are key for evaluating the performance of 2.5G, 3G, and broadband wireless communications systems and components. In addition, the ESG vector signal generator offers frequency coverage up to 6GHz, which meets the specific requirements of wireless LAN.
Providing a comprehensive feature set, it offers analog modulation, digital modulation with standard and custom formats, excellent level accuracy and spectral purity, and a highly configurable architecture that is ideal for general purpose research and development as well as manufacturing or troubleshooting applications. Together with the PXA-N9030A spectrumanalyzer a RF digital modulation test environment has been created under control of Agilent's ADS.

For more details go to the Manuals

 

Top

 


 

 

Agilent PSG E8267D Vector Signal Generator 


Agilent (Keysight) 's  E8267D PSG vector signal generator is the industry's first integrated microwave vector signal generator with I/Q modulation up to 44 GHz. It features an advanced wideband internal baseband generator capable of flexible arbitrary waveform playback or sophisticated real-time signal generation. The E8267D PSG also has a built-in wideband I/Q modulator that delivers up to 2 GHz RF modulation bandwidth and is a perfect complement to Agilent's N6030A stand-alone wideband arbitrary waveform generator for I/Q waveform simulations up to 1 GHz RF bandwidth. This groundbreaking integrated vector functionality, only available in the E8267D PSG, drastically simplifies the generation of complex modulated signals for design and manufacturing test applications in aerospace, defense, satellite communications, and broadband wireless. Together with the PXA-N9030A spectrumanalyzer a RF digital modulation test environment has been created under control of Agilent's ADS.

Signal Characteristics

  • 250 kHz to 20, 31.8, or 44 GHz (.001 Hz resolution)
  • +22 dBm @ 20 GHz and +18 dBm @ 40 GHz output power (typ)
  • 160 MHz (extendable to 2 GHz) RF modulation bandwidth

Modulation and Sweep

  • AM, FM, ØM, and pulse
  • ASK, FSK, MSK, PSK, QAM, custom I/Q
  • Step, list, and ramp sweep frequency and power
  • Source control using PXA Series spectrum analyzer

 

Top


 

Agilent PXA-N9030A Real Time Spectrum Analyzer

 

 

The Agilent N9030 PXA high-performance Real Time Spectrum Analyzer measures and monitors complex RF and microwave signals up to 26.5 GHz. With optional external mixing, the frequency coverage can be expanded.

  • Dynamic range (-154 dBm DANL, +17 dBm TOI, -116 dBc/Hz phase noise at 10 kHz offset). Accuracy (±0.62 dB absolute amplitude accuracy, ±0.38 dB frequency response, ±0.07 dB log amplification linearity). View PXA Data Sheet
  • 160 MHz analysis bandwidth to capture and measure complex signals. View:  160 MHz bandwidth digitizers online demo!
  • Flexible platform with 16 optional, easy-to-use built-in measurement personalities

For more details go to the Keysight site

 

 Agilent PNA-X N5244A Microwave Network Analyzer

 

 

  

Key Features & Specifications

 
  • 10 MHz to 43.5 GHz

  • 4-ports with two built-in sources

  • 126 dB system and 129 receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth

  • High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB)

  • Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver

  • Low noise floor of -111 dBm at 10 Hz IF bandwidth

 

Keysight site

 

 

Agilent E4404B Spectrum Analyzer

This spectrum analyzer is a general purpose instrument meant to cover a broad frequency range in the field of the Radio Frequencies (RF). To built up the spectrum with low resolution bandwidths (=< 10kHz) FFT is used to speed up the measurements. For the lowest frequency band the analyzer is extended with a special pre-amp option (IDR) which lead to the following main specs:

Frequency Range:

  • DC coupled 30 Hz to 6.7 GHz
  • AC coupled 100 kHz to 6.7 GHz


Frequency span:

  • 0 Hz (zero-span), 100 Hz to 6.7 GHz

Input range:

DANL to Maximum Input level: {DANL = Displayed Average Noise Level} 0 to 65 dB

Maximum safe:

  • AC Continuous Power: +30 dBm (1 W)
  • DC coupled 0 Vdc
  • AC coupled 50 Vdc

For more details go to the Keysight site

Top

 

Agilent N8973A Noise Figure Analyzer

 

Our Noise Figure Analyzer (Agilent 8973A)

The NFA is a high performance noise figure analyzer designed to make fast, and accurate noise figure measurements.
With this NFA you can set up complex measurements like measuring simultaneously noise figure and gain with the ability to view, print and save the data/display in multiple formats.

Type of Noise Source used:
A calibrated 15 dB Agilent 347C Noise Source with frequency range: 0.1 - 26.5 GHz

Key Features and Specifications:

Frequency Range: 10 MHz to 3.0 GHz

For more details go to the Keysight site

Top

 

 
 

Anritsu MP1763/1764 PPG & BERT

 
 

Features

  • High quality waveform

  • Wide frequency range covers STM 0/STS1 to 10 GbE, STM64/STS192, OUT-2, and 4.25G Fibre Channel

  • Low FM/PM-noise clock generator

  • Differential inputs

  • 1/8 parallel output standard, with available options for either 1/4 parallel output or 1/4 differential output

  • 8 Mbit programmable pattern corresponding to six frames of STM-64/ STS-192

  • Complementary outputs for both data and clock

Settable amplitudes and offsets for all 8 data outputs with 1/8 speed of the fundamental clock signal

For more details go to the Manuals

 

Top

 

 

Agilent E5501B Phase Noise Analyzer

 
 
 
 

The Phase Noise Analysis set-up consist of

For more details go to the Manuals

Top


 
 

Maury Load Pull Measurements

A setup where the Maury tuner is used as an antenna load.

Depicted above is an example of the frequency dependent behavior of a DUT under different load impedances.

For more details go to the Manuals

Top


R&S FSP40 Spectrum Analyzer

FSP is the ideal partner for both development and production, featuring the smallest level measurement uncertainty in its class, as well as excellent RF characteristics. The FSP is outstanding for its innovative measurement functions and incorporates proven technology with an all new hardware design to enable revolutionary performance, reliability and ease of service.

Frequency range 9 kHz to 40 GHz
Resolution bandwidth 1 Hz to 10 MHz
Displayed average noise level -155 dBm (1 Hz)
Phase noise -113 dB (1 Hz) at 10 kHz
Additional filters:
Channel filters from 100 Hz to 5 MHz and RRC filters
FFT filters from 1Hz to 30 kHz
EMI bandwidths and quasi-peak detector
Total measurement uncertainty 0.5 dB
Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard
Fast ACP in time domain
Up to 80 measurements per second (including trace transfer via GPIB)
Electronic attenuator
Application firmware available for GSM/EDGE, Bluetooth, WCDMA/HSDPA/TD-SCDMA, CDMA2000/1xEV-DV/1xEV-DO, WLAN, …

Specs

For more details go to the Manuals

 

Top

 

R&S ZVB20 4-port Network Analyzer

The Vector Network Analyzer R&S ZVB20 covering the frequency range from 10 MHz to 20 GHz and has been designed for universal measurements on passive and active components. Especially for multiport measurements and measurements on balanced devices the R&S ZVB simplifies vector analysis. Featuring comprehensive measurement functions, outstanding specifications, high measurement and data transfer speeds plus remote-control capability, the R&S ZVB is the ideal instrument for both development and production.

  • New multiport concept
  • Outstanding specifications
  • High speed
  • Modern user interface
  • Connectivity

 

Specs

For more details go to the Manuals

Top

 

R&S SMP02 Microwave Signal Generator

The Microwave Signal Generator R&S SMP is a reliable, high-precision signal source featuring high output power, high spectral purity and excellent pulse modulation. It is able to supply different modulations for any measurement on radar and communication equipment. A wide range of options ensures universal use in R&D, production, EMC and environmental measurements as well as in material testing.

Specs

For more details go to the Manuals

Top
 

R&S UPL Audio Analyzer

From Rohde&Schwarz we have the complete audio analysis system type UPL at our disposal. This system has several advanced measurement setups to determine typical defined specs in the audio range e.g.: SNR, THD, SINAD etc. The system consists of an high quality harmonic signal generator and a extremely high dynamic range signal analyzer.

Key features are:

For more details go to the Manuals

Top
 

 
 

Tektronix TDS7404 Digital Phosphor Oscilloscope

This digital phosphor oscilloscope is primarily meant to be used in a 50 Ohm environment. Therefore it possesses a very analog bandwidth of 4 GHz and a maximum sampling rate of 20 Gsa/s. Besides these outstanding RF properties in the time domain it also has very powerful software to determine the jitter of e.g. RF-oscillators. To carry out the measurements in a proper way we have in possession several passive and active probes.
For details and specifications concerning this special 4-channel oscilloscope click here.

Available probes

Specs

For more details go to the Manuals

  • The Mainframe with the Phase Detector (Mixer) and LNA
  • A RF spectrum analyzer Agilent E4404B
  • PC with FFT analyzer and software to control the total set up
  • A High Performance Wide-band (100 kHz-6 GHz) Synthesizer Agilent 8665B with an optional low noise output to be a part of the PLL circuit as denoted in the schematic above.
  • Instruments with 2,3 and 4 ports
  • Multiport capability
  • Ability of balanced measurements
  • 20 001 points per trace
  • Dynamic range better than 123 dB
  • Power sweep range 50 dB
  • Measurement time <8 ms (201 points)
  • Switching between channels <1 ms
  • Switching between setups <10 ms
  • Data transfer time <0.7 ms (201 points via RSIB)
  • Simultaneous measurement of more than one DUT
  • Intuitive Windows-based mouse operation
  • Operation using hardkeys and softkeys
  • High number of channels and traces
  • Parallel setup administration
  • Operating wizards for e.g. balanced measurements and calibrations
  • Compatibility with conventional design tools
  • Trace data exchange between PC and R&S ZVB in both directions
  • Remote control via GPIB and LAN
  • Digital I/O port
  • USB connectors
  • Compact instrument with integrated PC
  • Wide variety of test functions and numerous test signals for performing virtually all measurement tasks
  • Versatile analysis thanks to internal FFT analyzer of wide dynamic range and high frequency resolution
  • Any number of digital filters, also for analog measurements
  • Maximum dynamic range for the analysis of high-grade components
  • Mnemonic analysis and generation of channel status data of digital audio interfaces
  • Measurement/generation of protocol errors at digital interfaces
  • Variety of sweep functions
  • More than 10 weighting filters highpass, lowpass, bandpass filters